Enjoy Tax-Free Shopping in Most States! Learn more

Enjoy Tax-Free Shopping in Most States! Learn more

Enjoy Tax-Free Shopping in Most States! Learn more

Your First Ride

Key Points and Steps from the User Manual for All Bikes and Trikes

Unboxing: Congratulations on your new Perraro electric bike or trike! It comes fully assembled in the box.

Inside, you'll find your electric bike or trike, a charger, keys, and a digital user manual. Before unpacking, ensure all these items are present. If anything is missing or damaged, contact Perraro immediately for assistance.

Shipping can be rough, so your bike or trike may need some adjustments when unboxed. We suggest having these initial adjustments and inspections done by a professional, certified bicycle mechanic.

To set up, unfold your bike or trike and insert the handlebars or seat post, depending on the model. For detailed guidance, refer to the 'Unboxing' section in the user manual.

Inspection:

  • Check the tire and tire bead position inside the rim. Inflate the tires within the recommended pressure range indicated on the sidewalls. Inflate gradually and ensure the tire bead is seated correctly.
  • Inspect the seat post clamp and handlebar stem quick releases, adjusting them to the torque values listed in the user manual.
  • Make sure the seat post and handlebar stem are inserted past their minimum insertion points to avoid undue stress and potential failure.
  • Double-check that the frame folding latch and handlebar folding latch are locked securely.

Turning the Bike On:

  • Charge your battery fully before your first ride.
  • If the battery isn't already in place, secure it in the frame or mount and lock it. Insert the key into the battery port and turn it to the ON position.
  • Press and hold the power button on the left handlebar until the display comes on.

Operating Your Bike or Trike:

  • Choose your pedal assist level using the plus and minus buttons. Level 0 provides no assistance, while level 5 offers the highest.
  • The right handlebar has a half-twist throttle. Gradually twist it for desired speed and acceleration, being careful not to activate it unintentionally at a stop.
  • To turn on the headlight and tail light, press and hold the plus button. The battery must be installed for the headlight to function.

You’re all set for your ride! Enjoy and stay safe!

For any questions or additional guidance, contact our support team at support@perraroelectricbike.com or call us at (949) 414-8003.

 

Leave a comment

Please note: comments must be approved before they are published.