Fall Sale! 🎉 Save $100 on Electric Trikes
+ Tax-Free in Most States!
Grab your e-trike before the offer ends!

Power Meter on Your eBike or Electric Trike's LCD Display

by Perraro Electric Bike in LCD Display Essentials

The power meter featured on the display of your electric trike or e-bike serves as an instant visual guide to the motor's power output. You'll notice a vertical bar on the right side of the display that adjusts its height to match the current level of power:

  • Minimum Level: When the bar is at the bottom, it indicates no power assist from the motor, as displayed by "0." In this state, your electric bike/trike is in manual mode, propelled only by your pedaling effort.

  • Intermediate Levels: As the bar ascends, it changes color from green to yellow, then orange, and finally to pink, each step up representing a stronger contribution from the motor to assist your ride.

  • Maximum Level: When the bar is fully extended at the top, showing in red, it signifies full power assist. This setting provides the greatest ease in pedaling, particularly beneficial when facing steep inclines or needing a break from intense pedaling.Power Meter on the LCD Display

This dynamic bar allows you to gauge the motor assist level at a glance, helping you modify your input or the bike/trike's settings as you see fit during your ride.

If you require any help or have questions about the power meter or any other electric bike/trike features, please contact us at support@perraroelectricbike.com or call (949) 414-8003.

Previous Post Next Post

Related Posts

How to Customize Your eBike or Electric Trike's Display Settings

Personalizing your eBike or electric trike's display settings enhances your riding experience by allowing adjustments that suit your specific preferences. Follow these steps to tailor your device settings effectively: Accessing the Settings Menu Starting Up: Power on the display by pressing the Power button. Menu Entry: Within the first 10 seconds of activation, press and hold the “M” button for 2 seconds to enter the settings menu. Navigating Through Settings Scrolling: Use the “+” and “-” buttons to navigate through the various settings. Making Selections: Press the “M” button to select and confirm your choice. Configuring Particular Settings: Set Password: Enhance the security of your eBike or electric trike by setting up a startup password. This feature requires a password upon startup, providing an extra layer of security against unauthorized usage. Switching Unit: You can toggle the distance display between kilometers (km) and miles (mi). This setting allows you to view all distance-related readouts in the unit of measure you are most comfortable with or is most commonly used in your region. Speed Limit: Control your ride's pace by setting a speed limit on your eBike or electric trike. Whether you need to increase or decrease your speed, this setting helps ensure your ride matches your desired speed level.  Adjusting Brightness Levels: The display's backlight brightness can be adjusted to suit your visibility needs. It has five levels of brightness, ranging from 1 (dim) to 5 (brightest), enhancing screen readability according to different lighting conditions, whether you're riding in bright daylight or during nighttime. Background Color: Select either a black or white background for optimal display visibility. Setting the Time: For convenience and time tracking during your rides, you can set the current time on your display's clock. This feature helps you keep track of your riding duration and manage your time while on the go. Battery Info: Opt for your preferred battery level display format. You can choose to see it as a percentage for a general idea of charge remaining, or in volts for more precise battery status. System Info: This option allows you to review detailed system information of your eBike or electric trike, which can include technical details like software version and system health. Remember to save any changes you make before exiting the settings menu to ensure your preferences are applied. Should you need images for each setting, they will visually guide you in identifying these settings on the display and understanding how they are represented. If you require additional help with configuring your display settings or have other questions regarding your eBike or electric trike, you are welcome to contact support@perraroelectricbike.com or call (949) 414-8003.

Learn more

Battery Indicator and Voltage/Percentage Display on Your eBike/Electric Trike

To ensure you can keep track of your remaining ride time, your eBike or electric trike comes equipped with a comprehensive battery monitoring system on the LCD display: Visual Indicator: Located on the left side of the LCD display, the battery indicator provides a quick visual reference of your battery's charge level, using a scale from 1 to 5 bars. This immediate visual feedback is invaluable for understanding how much power you have remaining during a ride. Battery Levels: As the battery depletes, the number of filled bars will decrease correspondingly. When the battery's charge level drops below 5%, the display will show no bars, and the battery icon will begin to flash, signaling that it's time to recharge your eBike/electric trike. Voltage/Percentage Readout: On the top right corner of the display, the current battery voltage is displayed, providing a precise measure of the remaining battery life. For those who prefer a more general indicator, this readout can be switched to show the remaining charge as a percentage. You can toggle between these two formats in the display's settings menu, allowing you to monitor your battery status in the format that suits you best. Efficient Energy Management: This dual-format system of monitoring battery life—either through voltage or percentage—ensures that you're always informed about the energy status of your eBike/electric trike. With this knowledge, you can plan your journeys more effectively and time your recharges to maintain consistent power for all your trips. Staying informed about the battery level is a crucial aspect of managing the energy use on your eBike/electric trike, ensuring you have a reliable and enjoyable ride every time. If you need further assistance or have any questions about the battery indicators or changing the display settings on your eBike/electric trike, please don't hesitate to reach out at support@perraroelectricbike.com or call (949) 414-8003.

Learn more

Walk Assist Mode on Your Electric Bike/Trike

Walk Assist Mode is a feature designed to help you move your electric bike or trike alongside you while walking, without exerting the full effort of manually pushing its weight. This mode provides a low-power motor assist that moves the bike/trike at a slow, steady pace, matching walking speed. Activating Walk Assist Mode: Starting Walk Assist: To activate Walk Assist Mode, press and hold the “-” button on your  Engagement: Continue to hold the “-” button for 2 seconds. Upon doing so, the bike/trike’s display will switch to indicate that Walk Assist Mode is active. A “Walking Icon” appears in the PAS display area, signaling that the feature is engaged. In Action: Once activated, the motor will provide a gentle forward motion. This allows you to comfortably walk alongside your bike/trike without pushing it entirely with your own strength. It’s particularly helpful when navigating through areas where riding isn’t possible or when moving up ramps and inclines. Exiting Walk Assist Mode: Deactivation: To deactivate Walk Assist Mode, simply release the “-” button. The trike will stop providing motor assist, and you can then manually push the bike/trike or climb back on to ride as usual. When to Use Walk Assist Mode: Navigating Crowds: Ideal for moving through crowded spaces where riding might be difficult or prohibited. Inclines and Ramps: Offers assistance when going up slopes, ramps, or any inclined surfaces where pushing the bike/trike can be challenging. Indoor Spaces: Useful in indoor areas or transit stations where riding is not allowed but you need to move the bike/trike from one place to another. Remember, Walk Assist Mode is intended to help you move the bike/trike at a walking pace. It is not designed for riding, and you should not attempt to ride the bike/trike while this mode is engaged to ensure safety. Always check your surroundings and ensure you have a clear path while using Walk Assist Mode to prevent accidents or damage to the bike/trike. For additional help or inquiries, you can contact at support@perraroelectricbike.com or call (949) 414-8003.

Learn more

Leave a comment